LBC-2
Global Site> Electrical Evaluation System > LBC-2 Laser Current Measurement System

LBC-2 Laser Current Measurement System

This equipment can perform measurement of photoelectric current distribution of various solar cells and the photoelectric converting elements such as SiPD, CCD and CMOS. For measurement method, Laser Beam Induced Current has been employed.

As standard, 532nm of the green laser is provided with the system with moving the sample in the X-Y direction ande then short circuit current (Isc) is measured. The system has achieved 10µm spacial resolution and is capable to measure the sample up to 50×50mm.

Especially, for the perovskite solar cells and etc., which are manufactured in spin coating method, there is problem of diffrence of uniformity between the center and the edge on the sample surface.

This system is ideal to evaluate such samples. And this system can be also used to evaluate uniformity of coating materials for SiPD, CCD and CMOS.

 

 Catalog(PDF)

 

 

Features

 

  • An ideal system to evalluate the in-plane distribution of the perovskite solar cells

 

  • Optional lasers are available, which allow the system to perform measurement at different wavelength within the range of 375~900nm

 

  • Specify the area from the obtained data and both surfave nonuniformity [ (max.value - min.value) / (max.value + min.value) ×100%] and average value [ Total effective data / number of effective data ] can be obtained.

 

Measurement example

 

Measurement data of Perovskite proevided by Professor Miyasaka of Toin University of Yokohama in Japan

 

Irradiation Image

 

 

Software

 

 

 

Specifications

 

 Laser wavelength  520nm (±10nm)
 Output  1mW
 Irrdiation area  approx. 10µm
 Stability  ±5%/h
 Class  Class 2 in the international standard
 XY stage  ±25mm, 0.01mm minimum step
 Current measurement  10fA~20mA

       

 

Standard configuration

 

●Laser Light source ( wavelength 520nm )

●XY Stage
●Electrometer
●Sample chamber( with a manual shutter )
●Note PC
●Dedicated software for LBC-2

 

 

Options

 

●Laser(375/406/445/473/488/635/650/670/785/808/830/850/904/980nm)
●Observation camara and monitor

●Automatic shutter mechanism

●Si Photo diode

 

Dimensions

 

●Main unit:Approx.W750×D570×H650mm
 *excluding the electrometer, stage controller and the PC 

 

 

Related Product

 

BIP-KV100  Ionization Energy Measurement System

 
  • Measuring Ionization energy(work function) from 9.54~4.0V
  • Measuring the sample under nitrogen atmosphere,vacuum atmosphere, and atmosphere

 

SGA-25  Subgap Optical Absorption Meaurement System

  • Constant Photocurent Method(CPM)System 
  • Most suitable for defect level evaluation of oxide semiconductors such as IGZO